Used tires have long been a viable option to help you reduce the cost of putting new tires on your vehicle.   Keeping your tires in good condition is extremely important. Your tires are the only barrier that stands between you and the surface of the road. Used tires can be an excellent way to save money on your tire needs, but you will have to choose carefully, in order to get the best tires possible.   What should you look for in used tires for sale?  What makes a good choice, as opposed to a bad choice?  Here, you will find a guide to helping you make the best decision possible. Tread Condition – The tread on the tire is, literally, where the “rubber meets the road. “  As such, it is imperative that the tread be in excellent condition.   There are several warning signs that you should look for, including:Center Wear – If the center of the tire tread is significantly lower than that on the sides, it means that the tire has been run overinflated.   If this wear is minimal, the condition can be fixed by simply running the tire with the proper inflation over a period of time. Edge Wear – Edge wear can indicate many different things, including            Vehicle Alignment – If a vehicle is out of alignment, the edge wear will be dominant on either the outside edge or the inside edge, but not both.   If the edge wear is significant, the tire should be rejected. Low Tire Pressure – While an overinflated tire wears down the center, one that is underinflated will wear on both edges.   This can be insignificant if the wear is minimal.   However, significant edge wear can reduce your safety and the life of the tire. Sidewall Condition – The sidewall of the tire is the most vulnerable to damage.   Because there are no steel belts in the sidewall, this area can be damage easily.   Look for deep cuts in the sidewall as an indication that the tire should be rejected.   Small nicks do not pose a serious problem. Bead Condition – The condition of the tire bead is critical.   If there is damage to the tire bead, the tire will not seal properly on the rim, creating a safety hazard.   Make sure that the bead is clean and free of damage to make the best choice when inspecting used tires for sale.